Alcatel-Lucent 7210 SAS E OS System Management Manual page 113

Up to five RADIUS servers can be configured at any one time. RADIUS servers are accessed in order
from lowest to highest index for authentication requests until a response from a server is received. A
higher indexed server is only queried if no response is received from a lower indexed server (which
implies that the server is not available). If a response from a server is received, no other RADIUS
servers are queried. It is assumed that there are multiple identical servers configured as backups and
that the servers do not have redundant data.
The no form of the command removes the server from the configuration.
Default No RADIUS servers are configured.
Parameters index — The index for the RADIUS server. The index determines the sequence in which the servers
address ip-address — The IP address of the RADIUS server. Two RADIUS servers cannot have the
secret key — The secret key to access the RADIUS server. This secret key must match the password
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
shutdown
Syntax [no] shutdown
Context config>system>security>radius
Description This command administratively disables the RADIUS protocol operation. Shutting down the protocol
does not remove or change the configuration other than the administrative state.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
The no form of the command administratively enables the protocol which is the default state.
Default
no shutdown
7210 SAS-E OS System Management Guide
are queried for authentication requests. Servers are queried in order from lowest to highest index.
Values 1 — 5
same IP address. An error message is generated if the server address is a duplicate.
Values
ipv4-address
on the RADIUS server.
Values
Up to 20 characters in length.
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash parameter specified.
not used, the less encrypted hash form is assumed.
a.b.c.d (host bits must be 0)
Security
Page 113