Table 9: Show Management Access Filter Output Fields - Alcatel-Lucent 7210 SAS E OS System Management Manual

Security Commands
management-access-filter
Syntax management-access-filter [entry-id]
Context show>system>security
Description This command displays management access control filter information.
If no specific entry number is specified, all entries are displayed.
Parameters entry-id — Displays information about the specified management access filter entry.
Output Management Access Filter Output — The following table describes management access filter
output fields.

Table 9: Show Management Access Filter Output Fields

Page 134
Default All filter entries
Values
1 — 9999
Label
Def. action
Entry
Description
Src IP
Src interface
Dest port
Matches
Protocol
Action
Permit — Specifies that packets not matching the configured
selection criteria in any of the filter entries are permitted.
Deny — Specifies that packets not matching the configured selection
criteria in any of the filter entries are denied and that a ICMP host
unreachable message will be issued.
Deny-host-unreachble — Specifies that packets not matching
the configured selection criteria in the filter entries are denied.
The entry ID in a policy or filter table.
A text string describing the filter.
The source IP address used for management access filter match crite-
ria.
The interface name for the nexthop to which the packet should be for-
warded if it hits this filter entry.
The destination port.
The number of times a management packet has matched this filter
entry.
The IP protocol to match.
The action to take for packets that match this filter entry.
7210 SAS-E OS System Management Guide
Description