Alcatel-Lucent 7210 SAS E OS System Management Manual page 174

SNMP Security Commands
lockout minutes2 — The lockout period in minutes where the host is not allowed to login.
community
Syntax community community-string access-permissions [version SNMP-version]
no community community-string]
Context config>system>security>snmp
Description
This command creates SNMP community strings for SNMPv1 and SNMPv2c access. This command
is used in combination with the predefined access groups and views. To create custom access groups
and views and associate them with SNMPv1 or SNMPv2c access use the usm-community command.
When configured, community implies a security model for SNMPv1 and SNMPv2c only.
For SNMPv3 security, the access group command on page 172 must be configured.
The no form of the command removes a community string.
Default none
Parameters
community-string — Configure the SNMPv1 / SNMPv2c community string.
access-permissions — •r — Grants only read access to objects in the MIB, except security objects.
version {v1 | v2c | both} — Configures the scope of the community string to be for SNMPv1,
mask
Syntax mask mask-value [type {included | excluded} ]
no mask
Context config>system>security>snmp>view view-name
Description
The mask value and the mask type, along with the oid-value configured in the view command,
determines the access of each sub-identifier of an object identifier (MIB subtree) in the view.
Each bit in the mask corresponds to a sub-identifier position. For example, the most significant bit for
the first sub-identifier, the next most significant bit for the second sub-identifier, and so on. If the bit
position on the sub-identifier is available, it can be included or excluded.
Page 174
When the host exceeds the attempted count times in the specified time, then that host is locked
out from any further login attempts for the configured time period.
Default 10
Values
0 — 1440
• rw — Grants read and write access to all objects in the MIB, except security.
• rwa — Grants read and write access to all objects in the MIB, including security.
• vpls-mgmt — Assigns a unique SNMP community string to the management virtual router.
SNMPv2c, or both SNMPv1 and SNMPv2c access.
Default both
7210 SAS-E OS System Management Guide