Alcatel-Lucent 7210 SAS E OS System Management Manual page 105

Hide thumbs Also See for 7210 SAS E OS:
Table of Contents

Advertisement

sha key — The authentication protocol can be either HMAC-MD5-96 or HMAC-SHA-96.
privacy none — Do not perform SNMP packet encryption.
privacy des-key key — Configure the des-key for SNMP packet encryption. This key is stored in an
group
Syntax
group group-name
no group
Context
config>system>security>user>snmp
Description
This command associates (or links) a user to a group name. The group name must be configured with
the config>system>security>user >snmp>group command. The access command links the group
with one or more views, security model (s), security level (s), and read, write, and notify permissions
Default
No group name is associated with a user.
Parameters
group-name — Enter the group name (between 1 and 32 alphanumeric characters) that is associated
cannot-change-password
Syntax
[no] cannot-change-password
Context
config>system>security>user>console
Description
This command allows a user the privilege to change their password for both FTP and console login.
7210 SAS-E OS System Management Guide
The MD5 authentication key is stored in an encrypted format. The minimum key length is
determined by the config>system>security>password>minimum-length value. The
maximum length is 16 octets (32 printable characters).
The complexity of the key is determined by the complexity command.
The sha authentication key is stored in an encrypted format. The minimum key length is
determined by the config>system>security>password>minimum-length value. The
maximum length is 20 octets (40 printable characters).
The complexity of the key is determined by the complexity command.
Default
privacy none
encrypted format . The minimum key length is determined by the
config>system>security>password>minimum-length value. The maximum length is 16 octets
(32 printable characters). If privacy is configured then authentication must be enabled.
To remove a previously configured des-key, enter privacy none.
The complexity of the key is determined by the complexity command.
Default
privacy none
with this user. A user can be associated with one group-name per security model.
Security
Page 105

Advertisement

Table of Contents
loading

Table of Contents