Alcatel-Lucent 7210 SAS E OS System Management Manual page 185

snmp-rw
snmp-rwa
snmp-rwa
snmp-trap
snmp-trap
-------------------------------------------------------------------------------
No. of Access Groups: 8
===============================================================================
A:ALA-1#
A:ALA-1# show system security access-group detail
===============================================================================
Access Groups
===============================================================================
group name
-------------------------------------------------------------------------------
snmp-ro
-------------------------------------------------------------------------------
No. of Access Groups:
...
===============================================================================
A:ALA-1#
authentication
Syntax authentication [statistics]
Context show>system>security
Description
This command displays authentication information.
Output Authentication Output — The following table describes the authentication output fields.
7210 SAS-E OS System Management Guide
snmpv2c
snmpv1
snmpv2c
snmpv1
snmpv2c
security
model
snmpv1
Label
sequence
server address
status
type
timeout (secs)
single connection
retry count
none no-security
none iso
none iso
none
none
security read
level view
none no-security
The authentication order in which password authentication, authoriza-
tion, and accounting is attempted among RADIUS, TACACS+, and
local passwords.
The address of the RADIUS, TACACS+, or local server.
The status of the server.
The type of server.
Number of seconds the server will wait before timing out.
Specifies whether a single connection is established with the server.
The connection is kept open and is used by all the TELNET/SSH/FTP
sessions for AAA operations.
The number of attempts to retry contacting the server.
no-security no-security
iso iso
iso iso
iso
iso
write notify
view view
no-security
Description
SNMP
Page 185