Alcatel-Lucent 7210 SAS E OS System Management Manual page 98

Password Commands
complexity
Syntax [no] complexity [numeric] [special-character] [mixed-case]
Context config>system>security>password
Description
This command configures the complexity requirements of locally administered passwords, HMAC-
MD5-96, HMAC-SHA-96 and des-keys configured in the authentication section.
If more than one complexity command is entered, each command overwrites the previous command.
The no form of the command cancels all requirements. To remove a single requirement, enter the no
form of the command followed by the requirement that needs to be removed.
For example, no complexity numeric.
Default No complexity requirements are configured.
Parameters
mixed-case — Specifies that at least one upper and one lower case character must be present in the
numeric — Specifies that at least one numeric character must be present in the password. This
special-character — Specifies that at least one special character must be present in the password.
health-check
Syntax [no] health-check
Context config>system>security>password
Description
This command specifies that RADIUS and TACACS+ servers are monitored for 3 seconds each at 30
second intervals. Servers that are not configured will have 3 seconds of idle time. If in this process a
server is found to be unreachable, or a previously unreachable server starts responding, based on the
type of the server, a trap will be sent.
Page 98
• exit-on-reject is configured and the user does not exist, the user will not be
authenticated.
• The user is authenticated locally, then other methods, if configured, will be used for
authorization and accounting.
• The user is configured locally but without console access, login will be denied.
password. This keyword can be used in conjunction with the numeric and special-character
parameters. However, if this command is used with the authentication none command, the
complexity command is rejected.
keyword can be used in conjunction with the mixed-case and special-character parameters.
However, if this command is used with the authentication none command, the complexity
command is rejected.
This keyword can be used in conjunction with the numeric and special-character parameters.
However, if this command is used with the authentication none command, the complexity
command is rejected.
Special characters include: ~!@#$%^&*()_+|{}:"<>?`-=\[];',./.
7210 SAS-E OS System Management Guide