Alcatel-Lucent 7210 SAS E OS System Management Manual page 186

Show Commands
Sample Output
A:ALA-49>show>system>security# authentication
===============================================================================
Authentication
===============================================================================
server address
-------------------------------------------------------------------------------
10.10.10.103
10.10.0.1
10.10.0.2
10.10.0.3
-------------------------------------------------------------------------------
radius admin status
tacplus admin status : up
health check
-------------------------------------------------------------------------------
No. of Servers: 4
===============================================================================
A:ALA-49>show>system>security#
communities
Syntax communities
Context show>system>security
Description This command lists SNMP communities and characterisics.
Output Communities Ouput — The following table describes the communities output fields.
Page 186
Label
radius admin sta-
tus
tacplus admin sta-
tus
health check
No. of Servers
status
up
up
up
up
: down
: enabled
The administrative status of the RADIUS protocol operation.
The administrative status of the TACACS+ protocol operation.
Specifies whether the RADIUS and TACACS+ servers will be periodi-
cally monitored. Each server will be contacted every 30 seconds. If in
this process a server is found to be unreachable, or a previously
unreachable server starts responding, based on the type of the server, a
trap will be sent.
The total number of servers configured.
sequence : radius tacplus local
type timeout(secs)
radius 5
radius 5
radius 5
radius 5
7210 SAS-E OS System Management Guide
Description
single connection retry count
n/a 5
n/a 5
n/a 5
n/a 5