Alcatel-Lucent 7210 SAS E OS System Management Manual page 83

source-address
Syntax source-address
Context config>system>security
Description
This command specifies the source address that should be used in all unsolicited packets sent by the
application.
application
Syntax application app [ip-int-name|ip-address]
no application app
Context config>system>security>source-address
Description
This command specifies the application to use the source-IP address specified by the source-address
command.
Parameters app — Specify the application name.
ip-int-name | ip-address — Specifies the name of the IP interface, IP address . If the string contains
telnet-server
Syntax [no] telnet-server
Context config>system>security
Description
This command enables Telnet servers running on the system.
Telnet servers are off by default. At system startup, only SSH servers are enabled.
Telnet servers in networks limit a Telnet clients to three retries to login. The Telnet server discon-
nects the Telnet client session after three retries.
The no form of the command disables Telnet servers running on the system.
7210 SAS-E OS System Management Guide
Values
telnet, ftp, ssh, radius, tacplus, snmptrap, syslog, ping, traceroute, dns, sntp, ntp,
cflowd
special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Security
Page 83