Table 33: Show Log-Collector Output Fields - Alcatel-Lucent 7210 SAS E OS System Management Manual

--------------------------------------------------------------------------
Entry-id
Application
Event Number
Severity
Subject
Match Type
Router
Match Type
Description
--------------------------------------------------------------------------
==========================================================================
*A:ALA-48>config>log#
log-collector
Syntax log-collector
Context show>log
Description Show log collector statistics for the main, security, change and debug log collectors.
Output Log-Collector Output — The following table describes log-collector output fields.
7210 SAS-E OS System Management Guide
: 10
:
: 0
: major
:
: exact string
:
: exact string
: Collect only events of major severity or higher

Table 33: Show Log-Collector Output Fields

Label
<Collector Name>
Dest. Log ID
Filter ID
Status
Action
Operator
Operator
Operator
Operator
Operator
— The main event stream contains the events that are not
Main
explicitly directed to any other event stream.
Security — The security stream contains all events that affect
attempts to breach system security such as failed login attempts,
attempts to access MIB tables to which the user is not granted access or
attempts to enter a branch of the CLI to which access has not been
granted.
Change — The change event stream contains all events that directly
affect the configuration or operation of this node.
Debug — The debug-trace stream contains all messages in the debug
stream.
Specifies the event log stream destination.
The value is the index to the entry which defines the filter to be
applied to this log's source event stream to limit the events output to
this log's destination. If the value is 0, then all events in the source log
are forwarded to the destination.
Enabled — Logging is enabled.
Disabled — Logging is disabled.
Event and Accounting Logs
: forward
: off
: off
: greaterThanOrEqual
: off
:
: off
:
Description
Page 295