Returning To The Default Event Control Configuration - Alcatel-Lucent 7210 SAS E OS System Management Manual

Returning to the Default Event Control Configuration

The no form of the event-control command returns modified values back to the default values.
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
The following displays an example of the command usage to return to the default values:
Example
A:ALA-12>config>log# info detail
----------------------------------------------
#------------------------------------------
echo "Log Configuration"
#------------------------------------------
...
----------------------------------------------
A:ALA-12>config>log#
7210 SAS-E OS System Management Guide
no event-control application [event-name |event-nunmber]
: c
onfig# log
config>log# no event-control "" 2001
config>log# no event-control "" 2002
config>log# no event-control "" 2014
event-control "" 2001 generate minor
event-control "" 2002 generate warning
event-control "" 2003 generate warning
event-control "" 2004 generate critical
event-control "" 2005 generate warning
event-control "" 2006 generate warning
event-control "" 2007 generate warning
event-control "" 2008 generate warning
event-control "" 2009 generate warning
event-control "" 2010 generate warning
event-control "" 2011 generate warning
event-control "" 2012 generate warning
event-control "" 2013 generate warning
event-control "" 2014 generate warning
event-control "" 2015 generate critical
event-control "" 2016 generate warning
Event and Accounting Logs
Page 245