Table 12: Show Source Address Output Fields - Alcatel-Lucent 7210 SAS E OS System Management Manual

Security Commands
source-address
Syntax source-address
Context show>system>security
Description This command displays source-address configured for applications.
Output Source Address Output — The following table describes source address output fields.

Table 12: Show Source Address Output Fields

Sample Output
A:SR-7# show system security source-address
===============================================================================
Source-Address applications
===============================================================================
Application
-------------------------------------------------------------------------------
telnet
radius
===============================================================================
A:SR-7#
application
Syntax application app ip-int-name|ip-address
no application app
Context show>system>security>source-address
Description
This command configures an application to use source address.
Parameters
app — telent|ftp|ssh|radius|tacplus|snmptrap|syslog|ping|traceroute|dns|sntp|ntp|cflowd
ip-int-name|ip-ad* — ip-int-name 32 chars max
Page 138
Label
Application
IP address
Interface Name
Oper status
IP address/Interface Name
10.20.1.7
loopback1
Displays the source-address application.
Displays the source address IP address or interface name.
Up — The source address is operationally up.
Down — The source address is operationally down.
7210 SAS-E OS System Management Guide
Description
Oper status
Up
Up