Log Management Tasks
Deleting an SNMP Trap Group
Use the following CLI syntax to delete a trap target and SNMP trap group:
CLI Syntax: config>log
The following displays the SNMP trap group configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-12>config>log#
The following displays an example to delete a trap target and an SNMP trap group.
Example
Page 240
no snmp-trap-group log-id
no trap-target name
snmp-trap-group 10
trap-target 10.10.0.91:1 "snmpv2c" notify-community "com1"
exit
:
config>log# snmp-trap-group 10
config>log>snmp-trap-group# no trap-target 10.10.0.91:1
config>log>snmp-trap-group# exit
config>log# no snmp-trap-group 10
7210 SAS-E OS System Management Guide