Alcatel-Lucent 7210 SAS E OS System Management Manual page 258

Log Filter Commands
Any changes made to an existing filter, using any of the sub-commands, are immediately applied to
the destinations where the filter is applied.
The no form of the command removes the filter association from log IDs which causes those logs to
forward all events.
Default
No event filters are defined.
Parameters
default-action
Syntax default-action {drop | forward}
no default-action
Context config>log>filter filter-id
Description
The default action specifies the action that is applied to events when no action is specified in the
event filter entries or when an event does not match the specified criteria.
When multiple default-action commands are entered, the last command overwrites the previous
command.
The no form of the command reverts the default action to the default value (forward).
Default
default-action forward — The events which are not explicitly dropped by an event filter match are
forwarded.
Parameters
drop — The events which are not explicitly forwarded by an event filter match are dropped.
forward — The events which are not explicitly dropped by an event filter match are forwarded.
Page 258
filter-id — The filter ID uniquely identifies the filter.
Values
1 — 1000
7210 SAS-E OS System Management Guide