Alcatel-Lucent 7210 SAS E OS System Management Manual page 262

Log Filter Entry Match Commands
number
Syntax number {eq | neq | lt | lte | gt | gte} event-id
no number
Context config>log>filter filter-id>entry entry-id>match
Description This command adds an SR OS application event number as a match criterion.
SR OS event numbers uniquely identify a specific logging event within an application.
Only one number command can be entered per event filter entry. The latest number command
overwrites the previous command.
The no form of the command removes the event number as a match criterion.
Default
no event-number — No event ID match criterion is specified.
Parameters
eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are listed in
event-id — The event ID, expressed as a decimal integer.
router
Syntax router {eq | neq} router-instance [regexp]
no router
Context config>log>filter>entry>match
Description
This command specifies the log event matches for the router.
Parameters eq — Determines if the matching criteria should be equal to the specified value.
neq — Determines if the matching criteria should not be equal to the specified value.
router-instance — Specifies a router name up to 32 characters to be used in the match criteria.
Page 262
the table below. Valid operators are:
Operator
eq equal to
neq not equal to
lt less than
lte less than or equal to
gt greater than
gte greater than or equal to
Values 1 — 4294967295
Notes
7210 SAS-E OS System Management Guide