Mouse Options - Raritan Dominion KX III User Manual

Chapter 5: KVM Clients
52

Mouse Options

You can operate in either single mouse mode or dual mouse mode.
When in a dual mouse mode, and provided the option is properly configured,
the mouse cursors align.
When controlling a target server, the Remote Console displays two mouse
cursors - one belonging to your KX III client workstation, and the other
belonging to the target server.
When there are two mouse cursors, the device offers several mouse modes:
• Absolute (Mouse Synchronization)
Intelligent (Mouse Mode)
•
• Standard (Mouse Mode)
When the mouse pointer lies within the KVM Client target server window,
mouse movements and clicks are directly transmitted to the connected target
server.
While in motion, the client mouse pointer slightly leads the target mouse
pointer due to mouse acceleration settings.
Single mouse mode allows you to view only the target server's pointer. You can
use Single mouse mode when other modes don't work.
You can toggle between these two modes (single mouse and dual mouse).
Dual Mouse Modes
Absolute Mouse Synchronization
In this mode, absolute coordinates are used to keep the client and target
cursors in synch, even when the target mouse is set to a different acceleration
or speed. This mode is supported on servers with USB ports and is the default
mode for virtual media CIMs.
Absolute Mouse Synchronization requires the use of a virtual media CIM -
•
D2CIM-VUSB, D2CIM-DVUSB, D2CIM-DVUSB-DVI, D2CIM-DVUSB-HDMI,
D2CIM-DVUSB-DP, D2CIM-VUSB-USBC
To enter Absolute Mouse Synchronization:
• Choose Mouse > Absolute from the KVM client.
The black USB connector on the DVUSB CIMs are used for the keyboard and
mouse. The gray connector is used for virtual media.
For CIMs with two USB plugs, keep both connected to the device.
The device may not operate properly if both plugs are not connected to the
target server.