Removing A Server And Adjustable Guide Rail - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide

3.6.2 Removing a Server and Adjustable Guide Rail

Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Power off the server. For details, see
Step 3 Disconnect all power cables and signal cables from the server.
Step 4 Remove the server.
1.
2.
3.
Step 5 Loosen the four screws on the guide rail. See (1) in
Step 6 Shorten the guide rail and take it out. See (2) in
Issue 32 (2019-03-28)
NOTE
Remove power cables first to prevent damage or injury caused by static electricity.
Loosen the captive screws on the server panel using a screwdriver. See (1) in
3-29.
Figure 3-29 Removing the server
Pull out the server along the guide rails away from the cabinet. See (2) in
Place the removed server on an ESD platform.
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the Server
1 Safety
4 Powering On and Off the
Figure 3-30.
Figure 3-30.
Instructions.
Server.
Figure
Figure 3-29.
92