Huawei RH2288 V3 User Manual page 59

RH2288 V3 Server
User Guide
No
.
6
7
8
Table 2-10
the panel silkscreens when the RH2288 V3 is configured with a front 24-disk backplane and
two RAID controller cards.
Table 2-10 Mapping between the slot numbers in the LSI Logic SAS BIOS CU and the panel
silkscreens (2 RAID controller cards)
Adapter No. in the CU
0
1
l
l
Internal Cabling for a Server with Three RAID Controller Cards
The RH2288 V3 does not support rear hard disks if it is configured with three RAID
controller cards, including two in standard PCIe slots and one on the mainboard.
Issue 32 (2019-03-28)
Description
Signal cable for connecting the front disk
backplane (J1) to the mainboard (J1003)
Signal cable for connecting the USB plate of the
left mounting ear to the mainboard (J42)
Power cable for connecting the front disk
backplane (J24) to the mainboard (J30 PWR
CONN1)
NOTE
The silkscreen slot numbers for the standard PCIe cards of some models are Port 0 and Port 1, which
correspond to Port A and Port B respectively.
shows the mapping between the slot numbers in the LSI Logic SAS BIOS CU and
(4) and (5) of Figure 2-27
0).
(2) and (3) of Figure 2-27
1).
Copyright © Huawei Technologies Co., Ltd.
Slot No. in the CU
Slots 0–7
Slots 0–7
show the cable connection of RAID controller card 0 (adapter
show the cable connection of RAID controller card 1 (adapter
BOM Number
04051052
04051006
04150997
Panel Silkscreen
0–7
8–15
2 Overview
47