Huawei RH2288 V3 User Manual page 258

RH2288 V3 Server
User Guide
Figure 7-130 Installing the VGA board on a server with eight 3.5-inch hard disks
Step 5 Tighten the screws to secure the VGA board to the panel. See step (2) in
Step 6 Connect cables to the VGA board.
Step 7 Push the panel into the server in the arrow direction. See step (3) in
Step 8 Tighten the screws on the server. See step (4) in
Step 9 Connect all cables between the VGA board and the DVD drive. For details, see
Cabling.
Step 10 Install the fan module brackets in the chassis. See
Issue 32 (2019-03-28)
NOTE
If fan modules have been installed, remove the fan modules and their brackets before tightening the
screws.
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 7-130.
Figure 7-131.
7 Replacing Parts
Figure 7-130.
7-130.
2.7 Internal
246