Huawei RH2288 V3 User Manual page 99

RH2288 V3 Server
User Guide
Connecting an AC Power Cable
Step 1 Wear an ESD wrist strap.
Step 2 Connect one end of the AC power cable to the power port on the PSU of the server.
l
l
Issue 32 (2019-03-28)
If the PSU has a velcro strap, use the velcro strap to bind the power cable to the middle
of the PSU handle after connecting the power cable to the PSU to prevent power cable
poor contact or disconnection. See
the PSU using a velcro
Figure 3-24 Connecting a power cable (secured with the PSU using a velcro strap)
If the PSU has a plastic clip, perform the following steps to connect the power cable:
a. Open the plastic clip and place the power cable in the plastic clip. See step (1) in
Figure2 Connecting a power cable (secured with the PSU using a plastic
Then close the plastic clip. See step (2) in
(secured with the PSU using a plastic
Figure 3-25 Connecting a power cable (secured with the PSU using a plastic clip)
b. Open the lock of the plastic clip. See a of step (3) in
cable (secured with the PSU using a plastic
the PSU socket to ensure that the plastic clip is close to the connector of the power
Copyright © Huawei Technologies Co., Ltd.
Figure1 Connecting a power cable (secured with
strap).
Figure2 Connecting a power cable
clip).
3 Installing and Removing the Server
Figure2 Connecting a power
clip). Slide the plastic clip towards
clip).
87