RH2288 V3 Server
User Guide
Step 10 Hold down the latches on the cables to the RAID controller card, and remove the cables from
the RAID controller card. For details, see
Step 11 Loosen the screws on the RAID controller card. See step (1) in
Figure 7-59 Removing the RAID controller card
Step 12 Lift the RAID controller card slowly out of the server. See step (2) in
Step 13 Place the removed RAID controller card in an ESD bag.
----End
7.30 Installing the Screw-in RAID Controller Card
Install a screw-in RAID controller card to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the RAID controller card to be replaced. For details, see
in RAID Controller
Step 3 Take the spare RAID controller card out of its ESD bag.
Step 4 (Optional) Remove the rubber plugs from the ports on the RAID controller card if any. See
Figure
Issue 32 (2019-03-28)
Card.
7-60.
Copyright © Huawei Technologies Co., Ltd.
2.7 Internal
Cabling.
Figure
1 Safety
Instructions.
7 Replacing Parts
7-59.
Figure
7-59.
7.29 Removing the Screw-
181