Logging In To The Ibmc Webui - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide
Figure 9-2 iBMC Configuration
----End
Querying the IP Address on the iBMC CLI
Step 1 Log in to the iBMC CLI.
For details, see
Step 2 Run the ipmcget –d ipinfo command.
For details, see
----End

9.2 Logging In to the iBMC WebUI

Procedure
Step 1 Check that the OS and browser versions of the iBMC client (a local PC) are as per
requirements. If the remote console function needs to be used, ensure that the Java Runtime
Environment (JRE) version is as per requirements.
For details about software versions, see
In this example, the local PC runs Windows 7 and Internet Explorer 8.0.
Step 2 Connect the local PC to the iBMC management network port on the server by using a network
cable. Ensure that the IP addresses of the local PC and the iBMC management network port
are on the same network segment.
Issue 32 (2019-03-28)
9.3 Logging In to the iBMC
Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
CLI.
Guide.
Huawei Rack Server iBMC User
9 Common Operations
Guide.
268