Removing An Sd Card - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide
Step 5 Insert the SATADOM vertically into the connector on the mainboard until it snaps into place.
See
Figure 7-105 Installing a SATADOM
Step 6 Install the chassis cover. For details, see
Step 7 Install the RH2288 V3. For details, see
Step 8 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 9 Power on the RH2288 V3. For details, see
----End
Verification
Step 1 Start the server. When the BIOS startup screen is displayed, press Delete to start the BIOS
Setup Utility.
Step 2 Enter the BIOS password when prompted.
Step 3 Choose Advanced > PCH SATA Configuration and press Enter.
Step 4 Check the component information.
SATADOM 1 and SATADOM 2 correspond to Serial ATA Port 4 and Serial ATA Port 5
respectively.
----End

7.47 Removing an SD Card

Remove a Secure Digital (SD) card if it has failed or needs to be replaced with a new model.
Issue 32 (2019-03-28)
Figure 7-105.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
Cover.
3.5
Server.
223