Huawei RH2288 V3 User Manual page 245

RH2288 V3 Server
User Guide
Step 2 Remove the SD card board to be replaced. For details, see
Board.
Step 3 Take the spare SD card board out of the ESD bag.
Step 4 (Optional) If SD card 2 needs to be installed, install it first. For details, see
SD
Step 5 Align the SD card board connector with the port on the mainboard, and press the SD card
board downwards to secure it to the mainboard. See step (1) in
Figure 7-115 Installing an SD card board
Step 6 Tighten the two screws. See step (2) in
Step 7 Install SD card 1. For details, see
Step 8 Install the chassis cover. For details, see
Step 9 Install the RH2288 V3. For details, see
Issue 32 (2019-03-28)
Card.
NOTE
After the SD card board is replaced, the positions of SD card 1 and SD card 2 cannot be reversed. SD
card 1 is above the SD card board, and SD card 2 is below the SD card board.
NOTE
After the SD card board is replaced, data in the original SD card can be retained and RAID takes some
time to rebuild. Please wait.
During RAID rebuilding, you can view the progress and status on the iBMC event log page.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-115.
7.48 Installing an SD Card.
7.12 Installing the Chassis
3.4 Installing the
7 Replacing Parts
7.49 Removing an SD Card
7.48 Installing an
Figure 7-115.
Cover.
Server.
233