Huawei RH2288 V3 User Manual page 82

RH2288 V3 Server
User Guide
2.
3.
4.
Step 2 Install the RH2288 V3.
1.
2.
Issue 32 (2019-03-28)
Figure 3-7 Installing an adjustable guide rail
Insert the plugs into the following holes to secure the guide rail. See step (2) in
3-7.
– Second square hole on the front side of the guide rail
– Second square hole on the rear side of the guide rail
(Optional) Install an M6 screw in the first square hole at the rear of the guide rail to
secure it. See step (3) in
NOTE
You can install the adjustable guide rails free from screws. You can also install M6 screws at the
rear of the adjustable guide rails to make the server more shockproof and secure.
Install the other guide rail using the same method.
Lift the RH2288 V3 and move it to the cabinet. This task requires at least two people.
Place the RH2288 V3 onto the guide rails and slide it into the cabinet. See step (1) in
Figure 3-8.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-7.
3 Installing and Removing the Server
Figure
70