Huawei RH2288 V3 User Manual page 131

RH2288 V3 Server
User Guide
l
Issue 32 (2019-03-28)
d. Click Save.
No further action is required.
Set the IP address in the BIOS.
a. Click on the menu bar of the Remote Virtual Console.
For details about how to log in to the Remote Virtual Console, see
Remote Virtual Console.
b. Select Reset.
The system displays "Are you sure to perform this operation?"
c. Click Yes.
The server restarts.
d. Press Delete repeatedly when the screen shown in the following figure is displayed
during server startup.
Figure 5-18 BIOS startup screen
e. Enter a BIOS password as prompted. The screen for setting the BIOS is displayed.
f. Choose Advanced > IPMI iBMC Configuration and press Enter.
The IPMI iBMC Configuration screen is displayed.
g. Select iBMC Configuration and press Enter.
The iBMC Configuration screen is displayed, showing information about the IP
address of the iBMC network port. See
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the RH2288 V3
Figure 5-19.
9.7 Opening the
119