Installing The Dvd Drive - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide

7.24 Installing the DVD Drive

Install a DVD drive to replace the original one.
With Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the DVD drive to be replaced. For details, see
Step 3 Take the spare DVD drive out of its ESD bag.
Step 4 Tighten two M2 flat-head screws using the Phillips screwdriver to secure the plastic latch to
the DVD drive. See step (1) in
Figure 7-49 Installing the DVD drive on a server with eight 2.5-inch hard disks
Step 5 Insert the DVD drive into the support. See step (2) in
Step 6 Connect cables to the DVD drive. See step (3) in
Issue 32 (2019-03-28)
NOTE
If fan modules have been installed, remove them and the fan support before connecting cables.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-49.
Figure
Figure
7 Replacing Parts
7.23 Removing the DVD
7-49.
7-49.
Drive.
172