Removing The Vga Board - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide
Step 9 Install the RH2288 V3. For details, see
Step 10 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 11 Power on the RH2288 V3. For details, see
----End

7.55 Removing the VGA Board

Remove the video graphics array (VGA) board if it has failed.
Server with Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH2288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the air duct. For details, see
Step 8 Remove all fan modules. For details, see
Step 9 Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in
7-125.
Figure 7-125 Removing fan module brackets
Issue 32 (2019-03-28)
Cables.
7.13 Removing the Air
Copyright © Huawei Technologies Co., Ltd.
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
Duct.
7.15 Removing a Fan
7 Replacing Parts
3.5
Server.
Server.
3.6 Removing the
Cover.
Module.
Figure
241