Huawei RH2288 V3 User Manual page 251

RH2288 V3 Server
User Guide
Step 3 Take the spare rear disk backplane out of its ESD bag.
Step 4 Insert the rear disk backplane in the arrow direction until it does not move, and tighten the
screw to secure the rear disk backplane. See steps (1) and (2) in
Figure 7-121 Installing the rear disk backplane
Step 5 Install the rear hard disk module into the chassis and tighten the screws. See
Figure 7-122 Installing the rear hard disk module
Step 6 Connect cables to the rear disk backplane.
Figure 7-123
disks.
hard disks. If the server uses both 3.5-inch and 2.5-inch hard disks, refer to
Figure 7-124
The ports with the same number are connected to each other.
Issue 32 (2019-03-28)
shows the cable connections to the rear disk backplane for all 3.5-inch hard
Figure 7-124 shows the cable connections to the rear disk backplane for all 2.5-inch
for cable connections.
Copyright © Huawei Technologies Co., Ltd.
7 Replacing Parts
Figure 7-121.
Figure 7-122.
Figure 7-123 and
239