Huawei RH2288 V3 User Manual page 100

RH2288 V3 Server
User Guide
Step 3 Insert the other end of the AC power cable into the AC power socket on the cabinet. The AC
power socket is located horizontally at the rear of the cabinet. Select a jack on the power
socket for connection.
Step 4 Bind the power cable to the cable trough using cable ties.
----End
Connecting DC Power Cables
Step 1 Wear an ESD wrist strap.
Step 2 Connect the power cables to the wiring terminals on the PSU. The power cables are connected
properly once they are latched. See
l
l
l
Figure 3-26 Connecting DC power cables
Step 3 Connect the other end of the power cable to the DC power distribution frame (PDF) based on
the power cable connection rules.
Step 4 Bind the power cable to the cable trough using cable ties.
----End
Issue 32 (2019-03-28)
cable. See b of step (3) in
PSU using a plastic
Connect the OT terminal on the negative power cable to the NEG(-) wiring terminal on
the PSU.
Connect the OT terminal on the positive power cable to the RTN(+) wiring terminal on
the PSU.
Connect the OT terminal on the ground cable to the ground terminal on the PSU.
Copyright © Huawei Technologies Co., Ltd.
Figure2 Connecting a power cable (secured with the
clip).
Figure 3-26.
3 Installing and Removing the Server
88