Obtaining The Neteco Software License; Powering On A Server - Huawei FusionModule1000A20 Commissioning Manual
Prefabricated all-in-one data center
Hide thumbs
Also See for FusionModule1000A20:
- Maintenance manual (140 pages) ,
- Installation manual (107 pages) ,
- Product description (79 pages)
Table of Contents
Advertisement
FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
9.3.3.1.2 Obtaining the NetEco Software License
The NetEco software license is not provided together with software to the
customer. Therefore, obtain the NetEco software license in advance.
Obtain the license from the Huawei's enterprise support website.
●
●
9.3.3.1.3 Powering On a Server
This topic describes how to power on a server.
Procedure
Step 1 Ensure that the power cables and ground cables are securely connected with
correct polarity and good contact.
Step 2 Ensure that the input power supply for the AC PDB is off. Use a multimeter to test
the resistance between the power outputs of the AC PDB and between the BGND
and PGND. It is required that short circuit not occur between power outputs or
between the BGND and PGND.
Step 3 Switch on the power of a rack.
Step 4 Switch on the circuit breakers of PDBs for the rack. The power supply for
equipment in the rack is available.
Step 5 Press the power button on the chassis of the server to power on the server.
The 2288H V5 server is used as an example. The following figure shows the power
button of the 2288H V5 server.
Issue 03 (2022-12-15)
For enterprise users:
a.
Log in to Huawei's enterprise support website https://
support.huawei.com/enterprise.
b.
Browse or search iManager NetEco 6000 License Application Guide,
iManager NetEco 6000 License Application Guide from Support >
obtain
Network Energy > Fusion Modular Data Center > iManager NetEco
6000 at https://support.huawei.com/enterprise and apply for the license
of the NetEco software by referring to the guide.
For carriers users:
a.
Log in to Huawei's carrier support website https://support.huawei.com.
b.
Browse or search iManager NetEco 6000 License Application Guide,
iManager NetEco 6000 License Application Guide from Support >
obtain
Product Support > Network Energy > Data Center Facility > Fusion
Modular Data Center > iManager NetEco 6000 at https://
support.huawei.com and apply for the license of the NetEco software by
referring to the guide.
NO TE
After the server is started properly, the button/indicator of its power switch is displayed
green.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
78
Advertisement
Table of Contents
