Huawei RH2288 V3 User Manual page 240

RH2288 V3 Server
User Guide
Step 2 Determine the position of the SD card to be replaced.
Figure 7-110
and SD card 2 is below the SD card board.
l
l
Step 3 Remove the SD card to be replaced. For details, see
If SD card 2 needs to be replaced, remove the SD card board first.
Step 4 Take the spare SD card out of its ESD bag.
Step 5 Install the SD card.
l
l
1.
Issue 32 (2019-03-28)
shows the positions of the two SD cards. SD card 1 is above the SD card board,
If the server has only one microSD card and the OS is installed on the card, migrate the
data on the SD card to another storage device before the replacement.
If the server has two microSD cards, install the new microSD card in the same slot as the
replaced one.
Figure 7-110 SD card position
NOTE
l Ensure that the spare microSD card contains no data.
If SD card 1 needs to be replaced, perform 1.
If SD card 2 needs to be replaced, perform
Insert the SD card into the board. See
Copyright © Huawei Technologies Co., Ltd.
7.47 Removing an SD
1 to 3.
Figure 7-111.
7 Replacing Parts
Card.
228