Huawei RH2288 V3 User Manual page 167

RH2288 V3 Server
User Guide
Figure 7-29 Installing a fan module
Step 5 Close the memory window on the air duct. See step (2) in
Step 6 Install full-height full-length riser cards if they are required. For details, see
Riser
Step 7 Install the chassis cover. For details, see
Step 8 Install the RH2288 V3. For details, see
Step 9 Connect all external cables such as power and network cables. For details, see
Connecting External
Step 10 Power on the RH2288 V3. For details, see
----End
Issue 32 (2019-03-28)
NOTE
The fan modules are hot-swappable. You can skip steps
chassis cover without removing the server. The scenarios include but are not limited to: (1) the server is
installed on holding or adjustable guide rails and (2) the server is not installed in a cabinet.
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
Step 8 to Step 10
Figure
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
when you can open the
7-29.
7.20 Installing a
Cover.
3.5
Server.
155