Huawei RH2288 V3 User Manual page 275

RH2288 V3 Server
User Guide
An M.2 SSD riser card can be configured with two M.2 SATA SSD cards. The replacement
method is the same for the two M.2 SATA SSD cards.
This section uses the M.2 SATA SSD card corresponding to SATA1 port as an example.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the M.2 SATA SSD card to be replaced. For details, see
SATA SSD
Step 3 Take the spare M.2 SATA SSD card out of its ESD bag.
Step 4 Insert the M.2 SATA SSD card into the M.2 SSD riser at a 20° to 30° angle and press down it
horizontally. See step (1) in
Figure 7-149 Installing an M.2 SATA SSD card
Step 5 Tighten the screw on the M.2 SATA SSD card. See step (2) in
Step 6 Install the M.2 SSD riser card.
l
l
Step 7 Connect the cable to the M.2 SSD riser card. For details, see
M.2 SSD Riser
Step 8 Install the chassis cover. For details, see
Step 9 Install the RH2288 V3. For details, see
Step 10 Connect all external cables such as power and network cables. For details, see
Connecting External
Issue 32 (2019-03-28)
Card.
For details about how to install an M.2 SSD riser card on the mainboard, see
Installing a PCIe Card on the
For details about how to install an M.2 SSD riser card on a riser card, see
Installing a PCIe Card on the Riser
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-149.
Mainboard.
Card.
7.12 Installing the Chassis
3.4 Installing the
7 Replacing Parts
7.63 Removing an M.2
Figure 7-149.
7.22.1
2.7.1 Internal Cabling for an
Cover.
Server.
3.5
7.22.2
263