Huawei RH2288 V3 User Manual page 84

RH2288 V3 Server
User Guide
2.
3.
4.
5.
6.
Step 2 Install the server.
1.
Issue 32 (2019-03-28)
Figure 3-9 Installing a holding rail
Aligning the screws on the back end of the holding rail with the mounting holes of the
cabinet, insert the rail into position so that the latch clicks into place. See step (3) in
Figure 3-9.
Aligning the top screw on the front end of the holding rail with the level mounting hole
of the cabinet, insert the rail into position. See step (4) in
Push back the locking plate by its hook until the release latch clicks into place. See step
(5) in Figure 3-9.
(Optional) Secure the back end of the rail with an M6 screw through the corresponding
mounting hole in the cabinet. See step (6) in
Install the other guide rail using the same method.
Pull out the inner rails as far as they will go. See
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the Server
Figure 3-9.
Figure 3-9.
Figure 3-10.
72