Huawei RH2288 V3 User Manual page 236

RH2288 V3 Server
User Guide
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH2288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the PCIe card from the mainboard. For details, see
from the
Step 8 Loosen the screws that secure the rear hard disk module. See steps (1) and (2) in
7-106.
Figure 7-106 Removing the rear hard disk module
Step 9 Raise the rear hard disk module to remove it. See step (3) in
Step 10 Determine the position of the SD card to be removed. See
SD card 1 is above the SD card board, and SD card 2 is below the SD card board.
Issue 32 (2019-03-28)
Mainboard.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
4.2 Powering Off the
7.11 Removing the Chassis
7.21.2 Removing a PCIe Card
Figure
Figure
7 Replacing Parts
Server.
3.6 Removing the
Cover.
Figure
7-106.
7-107.
224