Installing A Riser Card - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide
Step 8 Remove the PCIe cards from the riser card tray. For details, see
Card from a Riser
Step 9 Loosen the screw on the riser card. See step (1) in
Figure 7-35 Removing a riser card
Step 10 Pull the riser card in the arrow direction to remove it. See step (2) in
Step 11 Place the removed riser card in the ESD bag.
----End

7.20 Installing a Riser Card

Install a riser card to replace the original one or add new PCIe cards.
You can insert only a riser card into the riser card slot on the mainboard, but cannot directly
insert a PCIe card into this slot.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the riser card to be replaced. For details, see
Step 3 Take the spare riser card out of its ESD bag.
Step 4 Push the riser card in the arrow direction until it does not move. See step (1) in
Issue 32 (2019-03-28)
Card.
Copyright © Huawei Technologies Co., Ltd.
7.21.1 Removing a PCIe
Figure 7-35.
1 Safety Instructions.
7.19 Removing the Riser
7 Replacing Parts
Figure 7-35.
Card.
Figure 7-36.
160