Installing An Os; Optional) Configuring The Boot From Iscsi Function For An Sp230 Flexible Nic - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide

5.8 Installing an OS

The RH2288 V3 is compatible with different types of OSs, including Windows, SLES, and
RHEL. Use the
server.
The OS installation method varies according to the OS type. For details about the installation
procedure, see the
5.9 (Optional) Configuring the Boot from iSCSI Function
for an SP230 flexible NIC
An SP230 supports boot from PXE or iSCSI. Boot from PXE is enabled by default. To boot
from iSCSI, enable it first.
Before configuring the boot from iSCSI function, load the optional ROM for iSCSI. For
details, see "Upgrading the Intel X540 flexible NIC Firmware" in the
Firmware Upgrade
Issue 32 (2019-03-28)
Huawei Server Compatibility Checker
Huawei Server OS Installation
NOTE
Before you configure the server to boot from iSCSI, ensure that the OS of the server supports the iSCSI
protocol stack and has the iSCSI driver.
Guide.
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the RH2288 V3
to check OSs supported by the
Guide.
Huawei Server
121