Installing An M.2 Sata Ssd Card - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide
Step 3 Power off the RH2288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the cables from the M.2 SSD riser card. For details, see
an M.2 SSD Riser
Step 8 Remove the M.2 SSD riser card.
l
l
Step 9 Loosen the screw on the M.2 SATA SSD card using an M3 Phillips screwdriver. See step (1)
in Figure
Figure 7-148 Removing an M.2 SATA SSD card
Step 10 Lifting the M.2 SATA SSD card at a 20° to 30° angle upwards, pull it out of the slot. See step
(2) in
Step 11 Place the removed M.2 SATA SSD card in an ESD bag.
----End

7.64 Installing an M.2 SATA SSD Card

Install an M.2 SATA SSD card to replace the faulty one.
Issue 32 (2019-03-28)
Card.
For details about how to remove an M.2 SSD riser card from the mainboard, see
Removing a PCIe Card from the
For details about how to remove an M.2 SSD riser card from a riser card, see
Removing a PCIe Card from a Riser
7-148.
Figure 7-148.
Copyright © Huawei Technologies Co., Ltd.
4.2 Powering Off the
7.11 Removing the Chassis
Mainboard.
Card.
7 Replacing Parts
Server.
3.6 Removing the
Cover.
2.7.1 Internal Cabling for
7.21.2
7.21.1
262