Configuring Raid - Huawei RH2288 V3 User Manual

RH2288 V3 Server
User Guide

5.4 Configuring RAID

Before configuring RAID, you need to obtain the IP address of the iBMC management
network port, and the user name and password for logging in to the iBMC WebUI. For details
about how to obtain the IP address of the management network port and how to operate the
iBMC, see the
Procedure
View the RAID controller card information on the iBMC WebUI.
1.
2.
3.
Issue 32 (2019-03-28)
--------------- Riser Card INFO ----------------
BC11PERK
BC11PERL
-------------- HDD Backplane INFO --------------
BC11EHBD
BC11EHBD
BC11EHBD CPLD Version:
CPLD Version: indicates the current complex programmable logical device
n
(CPLD) version of the RH2288 V3.
BIOS Version: indicates the BIOS version of the RH2288 V3.
n
Active iBMC Version: indicates the active iBMC version of the RH2288 V3.
n
Backup iBMC Version: indicates the backup iBMC version of the RH2288
n
V3.
c. Query the health status for the RH2288 V3.
iBMC / # ipmcget -d health
System in health state
If the message "System in health state" is displayed, no further action is
n
required.
If an alarm is generated, clear the alarm by performing
n
d. Query alarms for the RH2288 V3.
iBMC:/->ipmcget -d healthevents
System in health state
e. Clear alarms. For details, see the
Huawei Rack Server iBMC User
Log in to the iBMC WebUI.
For details, see 9.2 Logging In to the iBMC
Choose Information on the menu bar and choose Component Info or System Info in
the navigation tree. The Component Info or System Info page is displayed.
View the RAID controller card information, as shown in
Copyright © Huawei Technologies Co., Ltd.
BoardID: 0x0084
BoardID: 0x0085
BoardID: 0x0079
PCB: .A
(U3)1.02
Huawei Rack Server Alarm Handling
Guide.
WebUI.
5 Configuring the RH2288 V3
d and e.
(iBMC).
Figure 5-5 or Figure 5-6.
107