Collating Pages And Stapling (Staple) - Canon CLC5151 Copying And Mail Box Manual

Collating Pages and Stapling (Staple)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Page
Order (Staple)," on p. 3-41.
IMPORTANT
• The Finishing modes cannot be set if [Envelopes], [Transparencies], [Tracing Paper], [Labels], [Tab
Paper], or [Washi (JPN paper)] is selected as the paper type.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the
number of sheets.
• The Staple mode can be set only if an optional finisher is attached.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the fixing unit may become dirty, or the paper could
jam, and a service repair may be needed.
1
Press [Staple].
Press [Collate Not Set] if you do not want to collate the output.
If you want hole punches made, press [Hole Punch].
Collate Not Set
Staple
Hole Punch
Making a Copy With the Express Copy Basic Features Screen
7
7-29