E-Mail Notification At The End Of A Send Job (Job Done Notice) - Canon imageRunner 2220i User Manual

5
Press
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display. Press
is complete, press [Done].
Scanning starts.
When scanning is complete, the document will be sent to the specified destination
at the specified time.
NOTE
To cancel this setting, press [Send Settings] © [Delayed Send] ©[Cancel].
•
•
If Preview is set to 'On', you can preview the images of documents before sending.
(See "Previewing Originals (Preview)," on p. 1-178.)
•
To cancel all settings at once, press
Standard Scanning mode.)
•
If you want to cancel a delayed send job, do so from the System Monitor screen.
(See Chapter 2, "Checking Job and Device Status," in the Reference Guide.)
E-mail Notification at the End of a Send Job
(Job Done Notice)
This feature enables you to send a Job Done notification to a specified e-mail
address when a send job is complete. To send a Job Done Notice, you need to
store e-mail addresses in an address book beforehand. (See "Storing New
Addresses (Store/Edit Address Book)," on p. 4-5.)
1
Place your originals © specify the destination.
(Start).
(Start) once for each original. When scanning
Configuring Send Settings (Send Settings)
(Reset). (The machine returns to the
1
1-143