Page Order (Staple) - Canon iR3245 Manual

Page Order (Staple)

Remark
3
The Staple mode can be set only if an optional finisher
is attached.
1. Place your originals → press [Finishing].
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate or Offset
Collate mode is automatically set when you place your originals in the feeder. (See "Auto Collate(p.8-14).")
2. Press [Staple].
If you want to make hole punches, press [Hole Punch].
If the optional Finisher-S1 is attached:
●
If the optional Finisher-AE1 is attached:
●
If the optional Saddle Finisher-AE2 is attached:
●
3-40 Page Order (Staple)
When printing on special types of paper, such as
heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy
paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam,
and a service repair may be needed.