Maintenance
10
Maintenance
10.1
General Maintenance Information
Usually, the barcode positioning system BPS 37 does not require any maintenance by the
operator.
Cleaning
Should it become soiled, clean the glass window of the BPS 37 with a soft cloth.
Notice!
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
10.2
Repairs, Servicing
Repairs to the device must only be carried out by the manufacturer.
© Contact your Leuze distributor or service organisation should repairs be required.
For addresses, please refer to the back page of this operating manual.
34
BPS 37
Leuze
electronic
Leuze electronic