Table of Contents
Advertisement
154771-1CD
Using a Forklift
When using a forklift, the manipulator should be fixed on a pallet with shipping bolts and
bracket as shown in Fig. 4-3 "Transport Using a Forklift". Insert claws under the pallet and lift
it. The pallet must be strong enough to support the manipulator.
Transport the manipulator slowly with due caution in order to avoid overturn or slippage.
4.3.2
Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets at positions as shown in the
figures in Fig. 4-2 "Transport Using a Crane", to protect its driving units from various external
force during transport.
The shipping brackets are painted yellow.
Before turning ON the power, check to be sure that the shipping bolts and
NOTE
brackets have been removed. The shipping bolts and brackets then must be
stored for future use, in the event that the manipulator must be moved again for
relocation.
Pallet
Hexagon socket head cap screw M12
(length:50mm, 12screws)
Fig. 4-3 Transport Using a Forklift
4-5
4 Transport and Installation
4.3 Transport
HW1480052
24 of 66
Hide quick links:
Advertisement
Table of Contents
