4 Transport and Installation
4.2 Receiving and Handling
4.2
Receiving and Handling
When the package arrives, check the contents. Are the items and quantities in accordance
with your order sheet? Was any damage incurred during shipment?
• Confirm that the manipulator and the NX100 have the same order number. Special care
must be taken when more than one manipulator is to be installed.
If the numbers do not match, manipulators may not perform as expected and cause injury
or damage.
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER. No.
(a) NX100 (Front View)
CAUTION
Label (Enlarged View)
Fig. 4-1 Location of Order Number Labels
4-2
Check that the manipulator
and the NX100 have the
same order number.
(b) Manipulator (Side View)
HW1480052
154771-1CD
21 of 66