UPS5000-E-(350 kVA–800 kVA)
User Manual (50 kVA Power Modules)
4.1 Powering On and Starting the UPS
4.1.1 Powering On the UPS
Context
●
●
●
Procedure
Step 1 Turn on the upstream bypass and mains input switches.
Step 2 (Full configuration model) Turn on the UPS bypass input switch, mains input
switch, and output switch.
After the UPS is powered on, initialization begins. The MDU displays the
initialization progress bar.
----End
4.1.2 Initial Startup
Issue 15 (2022-01-30)
The following operations are applicable to a single UPS. For parallel systems,
contact technical support.
Before power-on, ensure that the devices have passed all check items in the
section "Verifying the Installation."
Before power-on, ensure that all the UPS switches and upstream switches are
OFF.
Copyright © Huawei Technologies Co., Ltd.
4
Operations
4 Operations
141