1: Sounder Silencing; Enable/Disable; 3: Individual Devices - Honeywell H-S81-HS Operation Manual

Enable/Disable

7.6.1 Sounder Silencing
The actuation of the Sounder silencing button will cause all actuators defined as sounders to deacti-
vate. This button can be used only in case of alarm, after silencing the local buzzer.
7.6.2 Control Panel Reset
Acting on the Reset button, the alarm condition of latching sensors will reset, as well as the troubles
of those types requiring a reset. This function can be activated only after silencing local buzzers and
sounders.
7.6.3 Evacuation
The actuation of the Evacuation button will cause all actuators configured as sounders to activate
immediately.
7.7 Enable/Disable
By selecting this option in the main menu, the enable/disable stage is accessed, as shown in the pic-
ture below.
7.7.1 Whole Sensor Zone
Select this option to enable/disable all the sensors of one zone.
7.7.2 Whole Actuator Zone
Select this option to enable/disable all the actuators of one zone.
7.7.3 Individual Devices
Select this option to enable/disable a single sensor or actuator.
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Figure 7.11 Enable/Disable
Operating Instructions
137