C.7: External Load Absorption - Honeywell H-S81-HS Operation Manual

Power Supply Set Dimensions
C.7 External Load Absorption
Part Number Description
Visual and audible alarm devices
Solenoids
Magnets
Gas detectors
Flame detectors
Replication relays
Other loads
Total quiescent current
C.8 Calculation of Total System Absorption
Description
H-S81-HS control panel absorption
Max. sensor absorption
Absorption of Addressable Devices
Absorption of External Loads
Total quiescent current
The table below indicates the power supply sets that can be used according to the total alarmed sys-
tem current calculated.
NOTE: Use the suitable power supply set according to the total current calculated with alarmed
system.
C.9 Calculation of Battery Capacity
According to the European and US standards, the operating time of H-S81-HS control panel with
primary voltage failure is:
•
•
172
Total current with
Power supply sets to be used
alarmed control
panel
<4A S81-PU001-1
<8A S81-PU001-2
<16A S81-PU001-4
<20A N/A
Standby: 24 h
Alarm: 5 minutes = 0.083 h
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Quiescent
Qty.
current
Total quiescent current
(A1)
(A2)
(A3+A4+A5+A6)
(A7)
(A8)
Power supply sets to be used in
in mono configuration
S81-PU001-2, S81-PU002-2
S81-PU001-4, S81-PU002-2
S81-PU002-2
S81-PU002-4
External Load Absorption
Total Current with
quiescent alarmed
current control panel
(A7) Alarmed
Total current with
alarmed control panel
(B1)
(B2)
(B3+B4+B5+B6)
(B7)
Alarmed (B8)
duplex configuration
Total
current with
alarmed
control
panel
(B7)