Disable/Enable
7.19 Disable/Enable
By selecting this option from the main menu, the enable/disable stage is accessed.
7.19.1 Individual Devices
Select this option to enable/disable a single sensor or actuator.
7.19.2 Local Sounder
Select this option to enable/disable the local sounder
7.20 Test
This option allows to test one or more sensors. To test a sensor, first select the desired zone from the
list. When a device is being tested, the relevant alarm/tamper/trouble events will be recorded and
sent to the peripheral devices, but will cause no activation in control panel logics. This function is
used, for instance, for monitoring a sensor.
NOTE: Only 10 devices can be tested at the same time. The test mode can be manually
removed from the same menu.
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Figure 7.37 Disable/Enable
Operating Instructions
155