Honeywell H-S81-HS Operation Manual page 92

Parts of the H-S81-HS System
S81-F4003-2 Module with 8 x 4-20mA analog inputs
S81-F5001-1 Module with 8 x 500mA monitored outputs
S81-F5001-2 Module with 8 x 500mA monitored outputs
S81-F5002-1 Module with 16 x 250mA non monitored outputs
S81-F5003-1 Module with 8 x 250mA monitored outputs for sounders S81-T8001-1
S81-F5004-1 Module with 4 x 2A monitored outputs for solenoids
S81-F5004-2 Module with 4 x 2A monitored outputs for solenoids
S81-F6001-1 Module for fire extinguishing systems
S81-F6002-1 Logic module
S81-F7002-1 Loop control module with ESP protocol
S81-F7006-1 Modbus RTU Master/Slave module
S81-F7007-1 Loop control module with SSP protocol
S81-F7008-1 Control modules for weighing modules
S81-F7009-1 Loop control module with XP95/Discovery protocol
S81-F7010-1 Loop control module with System Sensor protocol
1 Combined with the S81-T8005-1 termination module
2 Combined with the S81-T8001-1 termination module
2.5.1 S81-T8001-1
92
Description
16-terminal termination module. It is used with S81-E2001-1 type buses
to terminate the following modules: S81-F3002-1, S81-F5002-1, S81-
F5003-1
Technical Features
• Number of terminals: 16
• Assembly: on DIN bar
• Dimensions: W 57 x H 77 x D 50 mm
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Termination modules
Not available S81-CCT3R1
S81-T8006-1 S81-CCT3
S81-T8003-1
Not available S81-CCT3R
S81-T8007-1 S81-CCT1
S81-T8007-2 S81-T8007-1
S81-T8001-1 S81-T8007-2
S81-CCT1
2
S81-T8008-1 S81-T8008-1
Not available S81-CCT4
Not available S81-CCT4R
Not available Not available
Not available Not available
S81-T8003-1 S81-CCT4
S81-T8003-1 S81-CCT6
S81-T8003-1 S81-CCT4
S81-T8003-1 S81-CCT6
S81-T8003-1 S81-CCT4
S81-T8003-1 S81-CCT4
1